There are 3 general integration methods to control our electric curtains from 3-party home automation system. You may choose the best option suitable for your existing home control appliance. Please see below the 3 integration methods with other home automation system.
1. Infrared (IR) Remote Control
This is the easiest way to control our motor as it uses the same IR signal as our remotes.
Remarks:
The central control system should have a self-learning ability to enable it to synchronize the output signals of its infrared transmitter to the signals required by the motor's infrared receiver.
The motor control panel should use the factory setting (No.8) for the remote control. You can switch the motor number at the side of the motor. Please make sure you synchronize with the right motor number by testing first with the remote.
The transmitter and receiver should be positioned as close to each other as practicable.
2. Passive Switch Signal Control
Remarks:
The motor takes signal from 4-core wire.
Our manual pad and wall switch are using this connections.
Colours may vary by country.
3. High-Voltage Control through AC-DC Transformer Device
Remarks:
***Danger: High-Voltage Application (Only configure with certificated Electrician).
The motor takes signal from 3-core wire. 2 live wires connect to the mains.
AC-DC Transformer Device is not included in standard package (additional charge applies).